Changes

From BrewWiki
Jump to: navigation, search

Tips for Better Beer

16 bytes removed, 22:12, 28 December 2012
/* 7. Don't Use Plastic Fermentors */
==4. Boil for 60-90 Minutes==
[[Boiling]] your [[wort]] performs several important functions. It sterilizes your wort, vaporizes many undesirable compounds, releases bittering oils resins from the hops and coagulates proteins and tannins from the grains so they can fall out during cooling. To achieve all of these noble goals you need to boil for at least 60 minutes, and for lighter styles of beers a longer boil of 90 minutes is desirable.
==5. Control Fermentation Temperature==
Though relatively few brewers have dedicated fermentation refrigerators, there are simple methods you can use to maintain a constant temperature for ales during fermentation. The best technique I've seen is to pick a cool, dry area in your home and then wrap the fermentor in wet towels and place a fan in front of it. Wet the towels every 12 hours or so, and you should get a steady fermentation temperature in the 66-68F range. Most brewing shops sell stick-on thermometers that can be attached to your fermentation vessel to monitor the temperature.
==6. Switch to a Full Batch Boil==
==7. Don't Use Plastic Fermentors==
Glass carboys (or stainless) fermentors offer significant advantages over the typical plastic bucket. First they are much easier to clean and sterilize[[?]]. Second, glass (or stainless) provides a 100% oxygen barrier, where plastic buckets are porous and can leak oxygen if stored for long periods. Third, plastic fermentors often have very poor seals around the top of the bucket and can leak in both directions making it difficult to determine when fermentation has actually completed. A 5 gallon glass carboy will do the job better, and is available at a very reasonable price from most stores.
==8. Make a Yeast Starter==
While pitching directly from a tube or packet of liquid yeast is OK, your beer will ferment better if you make a yeast starter first. Boil up a small amount of dried malt extract in a quart of water with 1/4 oz of yeast. Cool it well and then pitch your yeast into it 2-3 days before you brew. Install some foil or an airlock over it and place it in a cool dark location. When brew day comes, pitching your starter will result in a quicker start and less risk of infection or off flavors.
==9. Make Long Term Purchases==
6
edits